ESY 住宅混合逆变器
支持的设备
| Device Type | Variants | Modbus TCP (Ethernet) | RS485 | Curtailment |
|---|---|---|---|---|
| Sunhome Hybrid inverter (单相) | HM6 | ❌ | ✅ | ✅ |
接线
SmartgridOne Controller 和 ESY 逆变器通过 RS485 通信。
配置
警告
固件版本低于以下版本的逆变器具有最低的 SoC 水平为 35%。 从该版本开始，用户可以配置此设置。
最低要求版本：MCU 版本 1040，DSP 版本 1042。
NOTE: RS485 Device Addresses
- You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
- Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
- For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.