KSTAR C&I 混合逆变器
支持的设备
| Device Type | Variants | Modbus TCP (Ethernet) | RS485 | Curtailment | Minimum device firmware version |
|---|---|---|---|---|---|
| BluePulse 混合逆变器 | KAC50DP-BC100DE | ✅ | ✅ | ✅ | V000B060D000 |
| KAC50DP-BC107DE / KAC50DP-BC107DE2 | |||||
| KAC50DP-BC197DE / KAC50DP-BC197DE2 |
接线
SmartgridOne Controller 和 KSTAR 逆变器通过以太网或 RS485 进行通信。
以太网
有关正确的以太网接线：请遵循 以太网接线指南。
RS485
配置
NOTE: RS485 Device Addresses
- You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
- Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
- For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.