Inverseurs Hybrides C&I KSTAR
Appareils pris en charge
| Device Type | Variants | Modbus TCP (Ethernet) | RS485 | Curtailment | Minimum device firmware version |
|---|---|---|---|---|---|
| Inverseur Hybride BluePulse | KAC50DP-BC100DE | ✅ | ✅ | ✅ | V000B060D000 |
| KAC50DP-BC107DE / KAC50DP-BC107DE2 | |||||
| KAC50DP-BC197DE / KAC50DP-BC197DE2 |
Câblage
Le SmartgridOne Controller et les inverseurs KSTAR communiquent via Ethernet ou RS485.
Ethernet
Pour un câblage Ethernet correct : Suivez les directives pour le câblage Ethernet.
RS485
Configuration
NOTE: RS485 Device Addresses
- You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
- Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
- For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.