Ga naar hoofdinhoud
logo

KSTAR C&I Hybride Omvormers

Ondersteunde Apparaten​

Device TypeVariantsModbus TCP (Ethernet)RS485CurtailmentMinimum device firmware version
BluePulse Hybride OmvormerKAC50DP-BC100DE✅✅✅V000B060D000
KAC50DP-BC107DE / KAC50DP-BC107DE2
KAC50DP-BC197DE / KAC50DP-BC197DE2
BC100DE batterijkast
BC70DE2/BC89DE2/BC107DE2 batterijkast
BC197DE2/BC215DE2/BC233DE2 batterijkast

Bedrading​

De SmartgridOne Controller en de KSTAR omvormers communiceren via Ethernet of RS485.

Ethernet​

TCP verbindingsschema

Voor correcte ethernet bedrading: Volg de richtlijnen voor ethernet bedrading.

RS485​

RS485 verbindingsschema

Configuratie​

NOTE: RS485 Device Addresses
  • You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
  • Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
  • For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.