Hoppa till huvudinnehåll
logotyp

KSTAR C&I Hybridomvandlare

Stödda enheter​

Device TypeVariantsModbus TCP (Ethernet)RS485CurtailmentMinimum device firmware version
BluePulse HybridomvandlareKAC50DP-BC100DE✅✅✅V000B060D000
KAC50DP-BC107DE / KAC50DP-BC107DE2
KAC50DP-BC197DE / KAC50DP-BC197DE2
BC100DE batteriskåp
BC70DE2/BC89DE2/BC107DE2 batteriskåp
BC197DE2/BC215DE2/BC233DE2 batteriskåp

Koppling​

SmartgridOne Controller och KSTAR-omvandlarna kommunicerar via Ethernet eller RS485.

Ethernet​

TCP kopplingsschema

För korrekt ethernetkoppling: Följ riktlinjerna för ethernetkoppling.

RS485​

RS485 kopplingsschema

Konfiguration​

NOTE: RS485 Device Addresses
  • You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
  • Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
  • For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.