Inversores Híbridos C&I de KSTAR

Dispositivos compatibles

Device Type	Variants	Modbus TCP (Ethernet)	RS485	Curtailment	Minimum device firmware version
BluePulse Hybrid Inverter	KAC50DP-BC100DE	✅	✅	✅	V000B060D000
	KAC50DP-BC107DE / KAC50DP-BC107DE2
	KAC50DP-BC197DE / KAC50DP-BC197DE2

El SmartgridOne Controller y los inversores KSTAR se comunican vía Ethernet o RS485.

Para un cableado ethernet correcto: Siga las directrices para el cableado ethernet.

You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.

Last updated December 11, 2025Edit this page

Device Type	Variants	Modbus TCP (Ethernet)	RS485	Curtailment	Minimum device firmware version
BluePulse Hybrid Inverter	KAC50DP-BC100DE	✅	✅	✅	V000B060D000
	KAC50DP-BC107DE / KAC50DP-BC107DE2
	KAC50DP-BC197DE / KAC50DP-BC197DE2

El SmartgridOne Controller y los inversores KSTAR se comunican vía Ethernet o RS485.

Para un cableado ethernet correcto: Siga las directrices para el cableado ethernet.

You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.

Last updated December 11, 2025Edit this page