DevicesPV hybrid and battery inverters
Supported Devices
| Device Type | Modbus TCP (Ethernet) | RS485 | Curtailment |
|---|---|---|---|
| Single Phase (1-3kW) | ❌ | ✅ | ❌ |
| Single Phase (3-6kW) | |||
| Single Phase (7-10kW) | |||
| Three Phase (3-25kW) | |||
| Three Phase (30kW) | |||
| Three Phase (36-60kW) | |||
| Three Phase (70-110kW) |
Specific Models
| Device Type | Modbus TCP (Ethernet) | RS485 | Curtailment |
|---|---|---|---|
| AF1-3.6K-SL-1 | ❌ | ✅ | ❌ |
| AF3-3.6K-SL | |||
| AF4-6K-SLP | |||
| AF1-6K-SL-0 | |||
| AF3-9.6K-DH | |||
| AF3-15K-MTH | |||
| AF3-30K-TH | |||
| AF36-50K-TH | |||
| AF3-12K-THP | |||
| AF3-30K-TH-0 | |||
| AF3-12K-THP-0 |
Configuration
1. Accessing the Inverter's Interface
-
Power On the Inverter
- Ensure the inverter is powered and operational
-
Navigate to the Main Menu
- Use the inverter's display panel to access the main menu
2. Locating Communication Settings
-
Enter the Settings Menu
- From the main menu, select 'Settings' or 'Advanced Settings'
-
Find Communication Options
- Look for options labeled 'Communication', 'RS485', or 'Modbus'
3. Configuring Modbus Parameters
-
Set Communication Protocol
- Choose 'Modbus RTU' as the protocol
-
Adjust Communication Parameters
Parameter Value Baud Rate 9600 or 19200 bps Parity None or Even Data Bits 8 Stop Bits 1 -
Assign Modbus Address
- Provide a unique slave ID (e.g., 1, 2, etc.) for the inverter