DevicesPV hybrid and battery inverters
Xantrex Inverters
Supported Devices
The SmartgridOne Controller supports Xantrex inverters that utilize the RS232 communication protocol.
| Device Type | Variants | Modbus TCP (Ethernet) | RS485 | Curtailment |
|---|---|---|---|---|
| Xantrex Inverters | Models with RS232 interface | ❌ | ❌ | ❌ |
Wiring
RS232 Connection
To connect the inverter to the SmartgridOne Controller, you must use the RS232 interface. This is distinct from the RS485 connection used by many other inverters.
- Port Selection: Ensure you are connecting to the specific RS232 port on your controller (or using a supported USB-to-RS232 adapter).
- Cable: You will typically need a DB9 serial cable.
| Pin (DB9) | Function |
|---|---|
| 2 | Rx (Receive) |
| 3 | Tx (Transmit) |
| 5 | GND (Ground) |
Warning
Distance Limit RS232 cables are designed for short distances. The cable length should generally not exceed 15 meters. If the inverter is located far away from the controller, this connection method may not be reliable.